In addition to the durable attachment it provides with double sided tongue-in-groove sections, the fast assembly capability make these panels preferable for prefabricated buildings . Generally produced in micro pressed form to achieve an aesthetic appearance for walls. The ability to use them both laterally and vertically provides assembly flexibility and good solutions for designers.
ФАСАДНАЯ ПАНЕЛЬ 1000 WD
- High performance insulation material.
- Wall panels are suitable for use on walls due to the system that conceals joint elements.
- It provides an ideal thermal insulation with finer panel thickness compared to alternative insulation materials.
- Vertical or angled corrugated sheet based on profile type as well as prefabricated corner panels and a wide variety of capped profiles are available.
- It is not harmful for the environment as n-Pentane gas is used for blowing polyurethane material.
- Color surface eliminates the need for any additional coating such as primer, finish, etc. and color options are available in RAL catalogue.
- Finishing (Polyester, PvdF, Plastisol, PVC) options are available for application site.
Информация о товаре
Production Plant
İskenderun
Favourable Width
1000 mm
Minimum Length
3 meters
Maximum Length
Depends on Transport Conditions
Density (EN 1602)
SmartCore&PIR Elite: 41(±2) kg/m3 – PIR: 40(±2) kg/m3
Thickness
30-40-50-60 mm
Thermal Conductivity (EN 13165)
SmartCore: 0,019 W/m K – PIR&PIR Elite: 0,022-0,024 W/m K
Dimensional Stability (EN 13165)
Level DS (TH) 11
Reaction to Fire (EN 13501)
PIR Elite: B-s1,d0 – PIR: B-s2,d0
Water Absorption (EN ISO 354)
By Volume %2 (168 hours)
Closed Cell Percentage (EN 14509)
%95
Vapour Diffusion Resistance (EN 12086)
30-100
Heat Resistance
-200 /+110 ºC
