КРОВЕЛЬНАЯ ПАНЕЛЬ С МЕМБРАНОЙ N5M
- Bottom face of the panel is metal (pre-painted galvanized sheet metal) whereas top surface is produced either with PVC membrane or TPO membrane.
- After on-site assembly, there is no need for coating by waterproofing material; therefore, it saves both time and labor.
- The panels are connected to the load-bearing system with its own threaded screws. After that, the lug over the other panel is joined by lamination method.
- With its 5-pitch, it is often preferred for heavy loads.
- It can be used with minimum 1.5% slope as roof cladding.
Информация о товаре
Production Plant
İstanbul - Balıkesir
Favourable Width
1000 mm
Minimum Length
3 meters
Maximum Length
Depends on Transport Conditions
Density (EN 1602)
SmartCore&PIR Elite: 41(±2) kg/m3 – PIR: 40(±2) kg/m3
Thickness
40-50-60-80-100 mm
Thermal Conductivity (EN 13165)
SmartCore: 0,019 W/m K – PIR&PIR Elite: 0,022-0,024 W/m K
Dimensional Stability (EN 13165)
Level DS (TH) 11
Reaction to Fire (EN 13501)
SmartCore&PIR Elite: B-s1,d0 – PIR: B-s2,d0
Water Absorption (EN ISO 354)
By Volume %2 (168 hours)
Closed Cell Percentage (EN 14509)
%95
Vapour Diffusion Resistance (EN 12086)
30-100
Heat Resistance
-200 /+110 ºC
